Spaces or some symbols that might confuse > disk eject-drive "NO NAME"ģ. But "" needs to be added if this value contains In short: using name, quicker if you know the device name. In short: using the ID number of the disk is easy, but printout of this menu must be done > disk eject-drive 0 That is a static value and should not change unless changed manually by you. Name can be used without issuing print as OR this disk name identifier which in this example case would be Menu has been issued and presuming that the order or count has not changed, as that would also possibly change the id. ID number is usable only after the print command on the specific Note that you can use disk "id" or "name" for this task. To do that we need to issue the command that is pasted below. Now to format it we must first unmount it. When running file menu print-out we also see that is > file printĢ. We can here see that system sees one storage drive and also that it is formatted with a known file-system type. Do a quick print of disk menu, to make sure that router sees the attached > disk print System will try to automatically mount it and in such case if storage is formatted in a supportedįile-system and partition record, it will be found in "/files" menu moments after you plugged it in to the host device.ġ. Let us presume that you have added a storage device to your device that is running RouterOS. It's done! Drive is formatted and should be automatically mounted after formatting process is finished.įormatting attached storage unit - Detailed Formatting the disk, in either of two supported file-systems (ext3 or > /disk format-drive 0 file-system=ext3 label=flashdriveĤ. Unmounting storage drive in order to format > /disk eject-drive 0ģ. Disk is attached, and already mounted automatically by > /disk printĠ disk1 usb-flash ext3 00 7.1GiB > /file printĢ. Except on CCR routers (Tile architecture) it is possible to use larger HDD in RouterOS if it is formatted with multiple partitions each smaller than 2TB.Įxamples Formatting attached storage unit - Simpleġ. Note: Max supported partition size in RouterOS is 2TB and larger hard disk drives will not work. This means migration and backup made easy! You can then add a fourth disk, copy the active data to it - unmount - unplug it - and move to another server, to keep using the actual database. For example User Manager could be used on 3 disks, one of them would be the active database, and the rest would be backups. You can add as many external or secondary drives as you want, and select any number of them for each of the mentioned feature usage. This is especially useful for RouterBOARD devices with SD/CF/USB slots and x86 systems with additional dedicated storage drives - as the built-in storage is quite small, an external drive comes in very handy when you want a big User Manager database, proxy cache or possibly SMB shares on your router. When configuring webproxy cache or usermanager database you will now be asked to write in the actual full path of the directory where you want these stores to be created. As a note, Webproxy and User manager stores as now shown as directories in "/files menu".This menu will list all attached storage devices, presuming that they are supported and in working condition.Since v6.20 release, attached storage is now managed in "/disk" sub-menu, instead of previous "/store disk" menu. 2.5 User manager moving database example.2.4 User manager database path configuration example.2.3 Web-Proxy cache configuration example.2.2 Formatting attached storage unit - Detailed.2.1 Formatting attached storage unit - Simple.
0 Comments
Leave a Reply. |